Hydraulic Post Driver Stanley PD45
The Stanley PD45 Hydraulic Post Driver is a heavy duty tool for driving a wide range of posts including #2, #3, & #4 lb/ft "U" channel, #3 & #4 Strong Back "U" channel, #1 delineator, up to 2-5/8 inch round, or up to 2-1/2 inch square posts. Ideal fo for DOT applications to drive breakway post to within 4 inches above ground level.
The PD45 is offered in three trigger options; two have the trigger in the handle (Valve-in-Handle) and one has a remote on/off. Both trigger Valve-inHandle models have an ON/OFF trigger adjacent to a guiding handle. The trigger extends the full length of the handle allowing the operator to activate the post driver at any position of its length. The trigger is “spring loaded” to the OFF position.
Features:(+) 7-9 gpm (26-34 lpm) operating flow (+) Lifting eye (+) ON/OFF trigger next to guide handle (model dependent) (+) Nitrogen charged accumulator (+) Guide handles
|
|||||||||||||||
PD45 | |||||||||||||||
TECHNICAL
|
Capacity |
#2, #3 and #4 #1 Delineator Post 63.5mm Square Post 67 mm Round Post |
Hydraulic Flow |
26-34 lpm |
Hydraulic Pressure |
140 bar |
Weight |
30 kg (31 kg with valve) |
Length |
76 cm |
Width |
26 cm |
Couplers |
HTMA Flush Face |
Recommeded together |
---|
GPV13
IW12
GR30
PARAGON: Hydraulic Post Driver Stanley PD45NOTICE: Written and visual materials on this page cannot be copied, quoted or used in other media without permission. Technical specifications are for general information purposes only. It may vary in final products according to sub-models. If these features are critical to your field applications, please contact PARAGON. Paragon Contact |